- Preparation – Cleaning
It is recommended to use the correct LOCTITE® cleaner for the surface to be bonded (such as LOCTITE® SF 7070™) to degrease and clean surfaces prior to applying the adhesive.
- Preparation – Priming
To improve adhesion on difficult to bond plastic surfaces, apply LOCTITE® SF 770™ to the bond area by brushing or dipping. Avoid applying excess primer. Allow the primer to dry.
- Preparation – Activation
If cure speed is too slow, use appropriate activator LOCTITE® SF 7452™ (see cure speed vs activator graph in TDS). Apply activator to one bond surface by spray, brush or dipping (not primed surfaces). Allow the activator to dry.
- Application
Apply adhesive onto one side/part.
- Assembly
Assemble parts immediately. The parts should be accurately located as the short fixture time leaves little opportunity for adjustment. Bond should be held or clamped until the adhesive has fixtured. Hint: if necessary, excess product can be cured by activator LOCTITE® SF 7452™. Spray or drop activator onto excess product.
Equipment
For precise dispensing of small amounts of adhesive, the use of dispensing needles is recommended.
admin –
Sản phẩm dùng chất lượng, hàng giao đúng mô tả, shop tư vấn nhiệt tình. Mọi người mua hàng ủng hộ tại shop này nhá.
Mr Tom –
Sản phẩm nhìn đẹp, chất lượng tốt, giao hàng nhanh.
Anh Phong –
Shop tư vấn nhiệt tình, shop bán hàng vui vẻ, giao hàng nhanh, đóng gói đẹp.
Ms Dung –
Sản phẩm dùng tốt, đóng gói đẹp. Sẽ ủng hộ shop lâu dài.
Mc Kendy –
Giao hàng nhanh, đóng gói đẹp, chất lượng sản phẩm quá tốt.
Anh Bình –
Tư vấn sản phẩm rõ ràng, thái độ nhiệt tình, shop tận tâm tư vấn. Chúc shop mua bán nhiều thuận lợi.
Purchases Trường Thọ –
Quality products, enthusiastic advice, beautiful packaging, fast delivery.
Supplies Hà Tiên –
The product meets the requirements, good quality. Beautiful packaging.