Hướng dẫn sử dụng Loctite 290

1. Preparation - Cleaning

It is recommended to use LOCTITE® SF 7070™ to degrease and clean surfaces prior to applying adhesive.

2. Application

Assemble nut and bolt. Dispense a low-viscosity wicking grade threadlocker, such as LOCTITE 290, at the nut and bolt juncture.

3a. Disassembly - Hand Tools

Disassemble with standard hand tools.

3b. Disassembly - Heat

If disassembly is not possible using normal hand tools, apply localized heat to approximately 500°F/260°C. Disassemble while hot with standard hand tools.

Hint

For the disassembly of corroded or seized parts use LOCTITE® LB 8040™ Freeze and Release.